AD/A109/36 - Damper Assembly of Main Rotor Hub

Airworthiness Directive - AD/A109/36 - Damper Assembly of Main Rotor Hub Airworthiness Directive - AD/A109/36 - Damper Assembly of Main Rotor Hub CASA Airworthiness Directive Jurisdiction:Commonwealth of Australia;CorporateName:Civil Aviation Safety Authority; Issue 4/2003,Rotorcraft,Agusta A109 Series Helicopters,Damper Assembly of Main Rotor Hub,36 DellaCa, Donna 2 1 2022-10-21T02:00:00Z 2022-10-21T02:01:00Z 1 356 2033 Office of Parliamentary Counsel 16 4 2385 16.0000 2006-09-21T00:00:00Z Toolkit http://www.activepdf.com 2022-10-21T00:00:00Z COMMONWEALTH OF AUSTRALIA   (Civil Aviation Safety Regulations 1998) , PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES   AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.   Agusta A109 Series Helicopters   AD/A109/36   Damper Assembly of Main Rotor Hub   4/2003   Applicability:   Agusta 109E helicopters fitted with damper part number 109-0111-06-103 with serial numbers up to 816 inclusive, excluding those with an “L” suffix in the serial number.   Requirement:   For dampers with serial numbers up to and including S/N 574:   Carry out inspection of the dampers in accordance with Agusta Bollettino Tecnico 109EP-2, compliance instructions Part 1. Carry out the modification of the dampers in accordance with Agusta Bollettino Tecnico 109EP-2, compliance instructions Part 2.   For dampers with serial numbers up to and including S/N 816: 3.         Carry out inspection of the dampers for slippage in accordance with Agusta Bollettino Tecnico 109EP-2, compliance instructions Part 3. Note: Italian AD 2002-187 refers.   Compliance:   1.   Effective 17 April 2003, Prior to the first flight of the day until requirement 2 is carried out. 2.         Within 5 flight hours from the effective date of this Directive.   3.         Prior to the first flight of the day.   This Airworthiness Directive becomes effective on 17 April 2003.   Background:   Loosening of the locking system on the damper assemblies has led to an increase in helicopter vibration. Modification to the dampers followed up with subsequent inspection of the dampers aim to prevent the loosening of the dampers.   James Coyne Delegate of the Civil Aviation Safety Authority 10 March 2003   The above AD is notified in the Commonwealth of Australia Gazette on 26 March 2003.       Page 1 of 1