AD/A119/1 Amdt 2 - Tail Rotor Blades
Airworthiness Directive - AD/A119/1 Amdt 2 - Tail Rotor Blades
Airworthiness Directive - AD/A119/1 Amdt 2 - Tail Rotor Blades CASA Airworthiness Directive Jurisdiction:Commonwealth of Australia;CorporateName:Civil Aviation Safety Authority; Issue 13/2001,Rotorcraft,Agusta A119 Series Helicopters,Tail Rotor Blades,1 Amdt 2 Swift, Aasha 5 3 2022-10-25T23:42:00Z 2022-12-06T07:33:00Z 2 537 3063 Office of Parliamentary Counsel 25 7 3593 16.0000
2006-09-21T00:00:00Z Toolkit http://www.activepdf.com 2022-10-25T00:00:00Z
COMMONWEALTH OF AUSTRALIA (Civil
Aviation
Regulations
1998) ,
PART
39
-
105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE
OF
AIRWORTHINESS
DIRECTIVES
Agusta
A119
Series
Helicopters
AIRWORTHINESS
DIRECTIVE
For
the
reasons
set
out
in
the
background
section,
the
CASA
delegate
whose
signature
appears
below
revokes
Airworthiness
Directive
(AD)
AD/A119/1
Amdt
1
and
issues
the
following
AD
under
subregulation
39.1
(1)
of
CAR
1998.
The
AD
requires
that
the
action
set
out
in
the
requirement
section
(being
action
that
the
delegate
considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the
circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in
the compliance section.
AD/A119/1
Amdt
2
Tail Rotor Blades 13/2001
DM
Applicability: All
A119
helicopters
with
tail
rotor
blades
part
number
109-8132-01-107
installed.
Requirement: 1. Inspect
in
accordance
with
Parts
I,
II
and
III
of
Agusta
Alert
Service
Bulletin
No. 119-1 Revision A, dated 22 August 2001, until Requirement 3 is accomplished.
2.
Retire
tail
rotor
blades
part
number
109-8132-01-107
from
service
in
accordance with Part IV of Agusta Alert Service Bulletin No. 119-1 Revision A, dated 22 August 2001, until compliance with Requirement 3.
3.
Replace
tail
rotor
blades
part
number
109-8132-01-107
with
tail
rotor
blades
part number 109-8132-01-111 in accordance with Agusta Alert Service Bulletin No. 119-2, dated 20 September 2001.
Note
1:
Tail
rotor
blades
part
number
109-8132-01-111
have
a
retirement
life
of 1,000 flight hours.
Note
2:
Italian
ENAC
AD
2001-426
refers.
Compliance: 1. For
Part
I:
Before
each
flight
and
at
each
airworthiness
check.
For
Part
II:
Within
10
flight
hours
after
11
April
2001,
and
thereafter
at
intervals not to exceed 10 flight hours; and at each abnormal increase in vibration level.
For
Part
III:
Within
25
flight
hours
after
11
April
2001,
and
thereafter
at
intervals not to exceed 25 flight hours.
2.
Upon
accumulating
50
flight
hours.
3.
Before
31
December
2001,
unless
already
accomplished.
The
compliance
times
of
the
previous
issue
of
this
Directive
remain
unchanged
for Requirements 1 and 2.
This Directive shall be entered on the Maintenance Release as maintenance required.
The
visual
inspection
required
by
Part
I
of
the
Requirement
Document may be performed by the Pilot in Command.
In which case, a copy of the Requirement Document and this Directive is to be carried in the aircraft.
COMMONWEALTH OF AUSTRALIA (Civil
Aviation
Regulations
1998) ,
PART
39
-
105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE
OF
AIRWORTHINESS
DIRECTIVES
This
amendment
becomes
effective
on
21
November
2001.
Background: The
Italian
ENAC
requires
inspections
for
possible
cracks
on
the
upper
and
lower sides of certain tail rotor blades.
Amendment
1
was
issued
following
discovery
of
a
cracked
TRB
on
an
Australian Aircraft, prompting ENAC to introduce a 50 hour life on the -107 blade.
Amendment
2
is
issued
in
response
to
a
new
ENAC
AD
which
introduces
new improved replacement tail rotor blades.
Amendment
1
of
this
Airworthiness
Directive
became
effective
on
7
September
2001. The original issue of this Airworthiness Directive became effective on 11 April 2001.
David
Alan
Villiers
Delegate
of
the
Civil
Aviation
Safety
Authority 14 November 2001
The
above
AD
is
notified
in
the
Commonwealth
of
Australia
Gazette
on
21
November
2001.
Official source: https://www.legislation.gov.au/Details/F2006B01840