Rail Safety Amendment Regulations 2010

i Rail Safety Amendment Regulations 2010 S.R. No. 114/2010 TABLE OF PROVISIONS Regulation Page 1 Objective 1 2 Authorising provision 1 3 Application for accreditation 1 ═══════════════ ENDNOTES 3 -- 1 of 4 -- 1 STATUTORY RULES 2010 S.R. No. 114/2010 Rail Safety Act 2006 Rail Safety Amendment Regulations 2010 The Governor in Council makes the following Regulations: Dated: 19 October 2010 Responsible Minister: MARTIN PAKULA Minister for Public Transport MATTHEW McBEATH Clerk of the Executive Council 1 Objective The objective of these Regulations is to amend the Rail Safety Regulations 2006 to make consequential amendments as a result of amendments to the Rail Safety Act 2006, made by Part 4 of the Transport Legislation Amendment Act 2007 for the purposes of facilitating safe rail operations in Victoria. 2 Authorising provision These Regulations are made under section 110 of the Rail Safety Act 2006. 3 Application for accreditation (1) For regulation 6(1)(g) of the Rail Safety Regulations 2006 1 substitute— -- 2 of 4 -- S.R. No. 114/2010 Rail Safety Amendment Regulations 2010 2 "(g) information identifying potential risks to the safety of rail operations that may require the development of a safety interface agreement.". (2) At the foot of regulation 6(1) of the Rail Safety Regulations 2006 insert— "Note The application must also be accompanied by the relevant fee: see regulation 50(1).". (3) For regulation 6(2)(g) of the Rail Safety Regulations 2006 substitute— "(g) information identifying potential risks to the safety of rail operations that may require the development of a safety interface agreement;". ═══════════════ r. 3 -- 3 of 4 -- S.R. No. 114/2010 Rail Safety Amendment Regulations 2010 3 ENDNOTES 1 Reg. 3: S.R. No. 96/2006 as amended by S.R. Nos 9/2008 and 59/2009. Endnotes -- 4 of 4 --