I AM THE LAW
Browse › Legislation › Victoria

Road Safety (Vehicles) Amendment (Electronic Stability Control) Regulations 2010

Legislation · Victoria · 2020
i Road Safety (Vehicles) Amendment (Electronic Stability Control) Regulations 2010 S.R. No. 80/2010 TABLE OF PROVISIONS Regulation Page 1 Objective 1 2 Authorising provision 1 3 Principal Regulations 1 4 Exemptions 2 5 Schedule 2 2 ═══════════════ ENDNOTES 3 -- 1 of 4 -- 1 STATUTORY RULES 2010 S.R. No. 80/2010 Road Safety Act 1986 Road Safety (Vehicles) Amendment (Electronic Stability Control) Regulations 2010 The Governor in Council makes the following Regulations: Dated: 17 August 2010 Responsible Minister: TIM PALLAS Minister for Roads and Ports MATTHEW McBEATH Acting Clerk of the Executive Council 1 Objective The objective of these Regulations is to amend the Road Safety (Vehicles) Regulations 2009 to make minor changes to the provisions relating to the requirement for a motor vehicle manufactured on or after 1 January 2011 to be fitted with a compliant system of electronic stability control. 2 Authorising provision These Regulations are made under section 95 of the Road Safety Act 1986. 3 Principal Regulations In these Regulations, the Road Safety (Vehicles) Regulations 2009 1 are called the Principal Regulations. -- 2 of 4 -- S.R. No. 80/2010 Road Safety (Vehicles) Amendment (Electronic Stability Control) Regulations 2010 2 4 Exemptions (1) In regulation 37(5) of the Principal Regulations for "until" substitute "up to, but not including,". (2) In regulation 37(6)(b) of the Principal Regulations for "by" substitute "before". (3) For regulation 37(8) of the Principal Regulations substitute— "(8) In this regulation— (a) a reference to motor vehicle industry includes, but is not limited to, a reference to manufacturers of motor vehicles and dealers in motor vehicles; and (b) a reference to a model of motor vehicle includes a reference to a variant of a model of motor vehicle.". 5 Schedule 2 (1) In clause 175(2)(d) of Schedule 2 to the Principal Regulations, after "a model" insert ", or a variant of a model,". (2) In clause 175(3) of Schedule 2 to the Principal Regulations, for "day on which a compliance plate is first affixed to it" substitute "date shown on the vehicle's compliance plate". ═══════════════ r. 4 -- 3 of 4 -- S.R. No. 80/2010 Road Safety (Vehicles) Amendment (Electronic Stability Control) Regulations 2010 3 ENDNOTES 1 Reg. 3: S.R. No. 118/2009 as amended by S.R. Nos 26/2010, 33/2010 and 35/2010. Endnotes -- 4 of 4 --